Description
Phoenix Contact QUINT4-UPS/24DC/24DC/10 Uninterruptible Power Supply
QUINT UPS, IQ Technology, DIN rail mounting, Screw connection, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A
The intelligent QUINT UPS for integration into established industrial networks: your systems continue to be supplied with uninterrupted power, even in the event of a mains failure. The battery management system with IQ Technology and a powerful battery charger ensures superior system availability.
| Input Data | |
| Input voltage | 24 V DC |
| Input voltage range | 18 V DC ... 30 V DC |
| Electric strength, max. | 35 V DC (Protected against polarity reversal) |
| Internal input fuse | no |
| Typical national grid voltage | 24 V DC |
| Voltage type of supply voltage | DC |
| Inrush current | ≤ 7 A (≤ 4 ms) |
| Reverse polarity protection | yes |
| Fixed backup threshold | 22 V DC |
| 30 V DC | |
| Dynamic activation threshold | > 1 V / 100 ms |
| Switch-on time | max. 3 s |
| Switch-on time during battery operation (Bat.-Start) | 8 s |
| Voltage drop, input/output | 0.4 V DC |
| Current consumption IN (UN, IOUT = IN, Icharge = 0) | 10.1 A |
| Current consumption Imax (UN, IOUT = IStat.Boost, ICharge = max) | 16.2 A |
| Current consumption INo-Load(UN, IOUT = 0, Icharge = 0) | 48 mA |
| Current consumption Icharge (UN, IOUT = 0, Icharge = max) | 3.5 A |
| Power consumption PN (UN, IOUT = IN, Icharge = 0) | 241 W |
| Power consumption Pmax (UN, IOUT = IStat.Boost, Icharge = max) | 384 W |
| Power consumption PNo-Load (UN, IOUT = 0, Icharge = 0) | 1.2 W |
| Power consumption Pcharge (UN, IOUT = 0, Icharge = max) | 90 W |
| Signal state Bat.-Start | |
| Connection labeling | 3.8 (+) |
| Channel | DI (digital input) |
| State | Bat.-Mode |
| State condition | Low level (30 ms) |
| Low signal | Input connected with SGnd (3.9) or Bat |
| High signal | Input not connected or connected with >UBat |
| Signal - state assignment | low - active |
| Reference potential | 3.9 (SGnd, identical to 1.2, 2.2, 4.2) |
| LED status indicator | Yellow (Bat.-Mode) |
| Signal state PS Boost | |
| Connection labeling | 3.7 (+) |
| Channel (configurable) | DI (digital input) default, AI (analog input) |
| State (configurable) | Charging current reduced |
| State condition | Low level |
| Low signal | Input connected with SGnd (3.9), <5 V DC or not connected |
| High signal | Input connected with 13 … 30 V DC |
| Signal - state assignment | low - active |
| Analog | 4 mA ... 20 mA (Offset zero point) |
| Unit signal | I (mA) |
| Load | 390 Ω |
| Reference potential | 3.9 (SGnd, identical to 1.2, 2.2, 4.2) |
| Signal state Remote | |
| Connection labeling | 3.6 (+) |
| Channel | DI (digital input) |
| State (configurable) | Disconnection |
| State condition | Low level |
| Low signal | Input connected with SGnd (3.9) or <5 V DC |
| High signal | Input not connected or connected with 13 … 30 V DC |
View AllClose
Related ProductsRelated Products
Out of stock
 Phoenix Contact TRIO-UPS-2G/1AC/24DC/5 Uninterruptible Power SupplyPhoenix Contact
$559.00
Phoenix Contact TRIO-UPS-2G/1AC/24DC/5 Uninterruptible Power Supply
Out of stock
Phoenix Contact UPS-BAT/PB/24DC/4AH Battery Module for Use with UPS SystemsPhoenix Contact
$255.00
Phoenix Contact UPS-BAT/PB/24DC/4AH Battery Module for Use with UPS SystemsBattery module (device with battery), VRLA-AGM, 24 V DC, 4 Ah, automatic detection and communication with QUINT UPS-IQ
Out of stock
Phoenix Contact UPS-BAT/PB/24DC/1.2AH Battery Module for Use with UPS SystemsPhoenix Contact
$299.00
Phoenix Contact UPS-BAT/PB/24DC/1.2AH Battery Module for Use with UPS Systems
Out of stock
Phoenix Contact RIF-0-RPT-24DC/21 Relay ModulePhoenix Contact
$19.99
Phoenix Contact RIF-0-RPT-24DC/21 Relay Module
Out of stock
  Phoenix Contact FL Switch SFNB 8TX 8 Port Network Unmanaged Ethernet SwitchPhoenix Contact
$184.99
Phoenix Contact FL Switch SFNB 8TX 8 Port Network Unmanaged Ethernet Switch
| |