Description
RACKSTUDS RSL2100 II 100-pack Maroon Smart Rack Mount System - Universal Replacement for Cage Nuts Used to Mount IT, Pro A/V, Security & Teleco Equipment in 19". Designed For Rails 2.2mm Thick.
- Longer Studs: Makes hanging easier when the gear has thicker 'ears'.
- New Nut: Added PZ2 screwdriver slot and finger flutes while maintaining M10 outside profile.
- Redesigned: Now even easier to insert.
- Stronger: >30% improvement in leverage tests.
- More Tolerant: Now fits even thicker rails. *
- Backwards Compatible: Works with the current nut and washer.
* Purple Version. Tested to work in Chatsworth and Hergo racks.
More about Rackstuds™:
- Rackstuds™ insert from the front and install in seconds.
- They are a breeze to remove and reuse.
- In under 55 seconds, you can complete a typical network switch installation.
- Over the course of a rack build, you can save hours.
- Rackstuds™ unique tool-free installation shaves even more time off your installation. Tighten by hand and you're done.
- Rackstuds™ are made from a metal replacement thermoplastic called Grivory.
- They are rated to hold equipment up to 20kg (44lbs).
- We exceeded our expectations with independent testing by SGC Labs
- The yield test results are Push-in: 46 kgs/101 lbs | Pull out: 92 kgs/202 lbs | Shear: 156 kgs/343 lbs.
- Rackstuds™ are made from a non-conductive reinforced thermoplastic.
- They won't pose an electrical threat to you or your equipment.
- Rackstuds are colour-coded, so if you drop one they are easy to find.
- Best of all, being plastic, they won't scratch your equipment!
- Rackstuds™ is available in two sizes.
- Our best-selling 'Red' Rackstuds fit square punched vertical rails and cover 80% of the racks on the market today.
- The unique 'Purple' Rackstuds fit thicker vertical rails found in open frames.
Additional Information
Stock Available Onehunga: |
0 |
Stock Available St Lukes: |
0 |
Stock Available Wellington: |
0 |
Stock Available Supplier: |
31 |