Thermalright Burst Assassin 120 SE ARGB CPU Air Cooler

Thermalright Burst Assassin 120 SE ARGB CPU Air Cooler

• [Product specification] Burst Assassin 120 SE ARGB; CPU Cooler dimensions: 120(L)x77(W)x148(H)mm (4.72x3.03x5.83inch); Heat sink material: aluminum,the 6 heatpipes oxidation-resistant pure copper heatpipes, and HDT heatpipes with direct touch fine underside finish technology, and specification symmetrical aluminium fins all allow for a further improvement in cooling performance.
• [No memory Height Limit] The heatsink is equipped with fin offset technology, so that the overall heatsink will not be limited by the memory height when it is installed, and there is no need to worry about the high vest of the motherboard.
• [148mm Height] From the pure copper base of the heatsink to the top of the heat pipe, the overall height is 148mm, which is highly compatible, compatible with small and medium-sized chassis, as a small heat sink with 6 heat pipes in a single tower, the heat dissipation performance is very good.
• [Excellent LED Light] The high-brightness LED atomizing argb fan blade can effectively reflect the light, making the ARGB lighting effect softer, and it matches the cooler and case more perfectly. Multiple light effect modes with ARGB support, color can be managed and synchronized through the port on motherboard.
• [Compatibility] The CPU cooler Socket supports: Intel: LGA1150/1151/1155/1156/1200/1700/1851,AMD:AM4/AM5; for different CPU socket platforms, corresponding mounting plate or fastener parts are provided.(Note: AMD's motherboard installation requires the use of the original motherboard backplane for installation.)

Technical Spec :
Heatsink Specifications：
Dimension：L124 mm x W52 mm x H148 mm
Weight：510g
Heat pipes：6mm heatpipe x 6 units

TL-C12C-S FAN Spec：
Dimension：L120 mm x W120 mm x H25 mm
Rated Speed：1550 RPM±10% (MAX)
Noise Level：25.6 dBA
Air Flow：66.17 CFM (MAX)
Air Pressure：1.53 mm H2O (MAX)
Ampere：0.20 A
Connector: 4 Pin (PWM Fan connector)
ARGB Connector：3 PIN 5V
Bearing Type : S-FDB Bearing